Wednesday, September 28, 2011

Aprons

The live weight tension beam is complete!  I built up the circumference with 1x2 strips and quarter round.  Later this week I will sew a canvas apron and install.  Meanwhile, I need to plan a warp for this new beam on the loom.  I am thinking a zephyr ruana.

Saturday, September 24, 2011

Ouch!

I have spent the past two days constructing a live weight tension second beam for the Liisa, I like to weave quickly so I want to advance my warp with a simple maneuver.  It took a little time, sweat and frustration but I am half way there.  In the midst of this I also had to lower the treadle set and drill new holes in the frame for the main beam.  I am not sure if I will add sectional rails yet.  But now I have heavy tension with the ratchet and adjustable tension where the warp can be advanced with the new beam.  My hands and head are very tired!







I still have to build up the beam with 4 pieces of 1x2 and then quarter round.  Drilling into the steel was the most time consuming (aside from hand sanding to enlarge the holes in the support blocks).

The treadle set now allows me to insert treadle pins through the texsolv and hold on the pins, this eliminates the need for being under the treadles with a crochet hook!



Tuesday, September 13, 2011

Shadow Weave Classes

As I do not have any store classes this fall I am thinking of opening up a Shadow Weave Study Class.  Students will make a scarf in the structure using 4, 6 or 8 shafts.  Those students owning a small portable loom are invited to bring their equipment.

Class fees will include supplies and will be run from my home.  Watch for more info on scheduling.  If you are interested, both new and prior students are invited to contact me for more information.


Tuesday, September 6, 2011

REVENGE OF THE SHRUNKEN HEADS!

Weavolution is having a Halloweave function!  I'm planning on leading a team of "shrunken heads."




Let me explain - as a teacher on Weavolution (weavolution.com - see link in sidebar) I am leading a group of weavers to explore fabrics with differential shrinkage or fabrics that require a certain type of wet finishing to obtain a special structural effect!  Join us - it will be SPOOKTACULAR!  Halloweave runs through the 31st October!

New Project

I have been wanting to do a wide project using my double flybox for some time.  Last year I started planning a bedspread in overshot.  Conventional thinking for a coverlet for a King size bed would be to make 3 panels.  However, the repeat is quite large and was not easy to condense to 3 panels without losing a lot of design elements.




So, I have decided to do a 60 inch panel, and then cut a second 60 inch panel into 2 and use a piped embelishment to join the panels.  Below is a sample using the colors:



The yarn is a 6/2 cotton set at 18 epi with the same weft and a Shetland wool pattern thread in brown.  

Sunday, September 4, 2011

Tired of Tying!

700 string heddles made.  Waiting for the work to be finished in the basement so I can put on a damask warp! 100 more to make for a total of 1600 heddles (inc the 800 texsolv I have).

Dawn

Friday, August 26, 2011

On The Back Burner

Weaving seems to be taking a back seat the last couple weeks.  My studio is off limits due to construction.  I was hoping to re-configure the drawloom, that too will have to wait.  Once Shadow weave classes are over I am thinking of some rep-weave placemats and I have an order for a baby blanket.


Tuesday, August 16, 2011

Into the Shadows!

Between the sounds of power tools and puppy barks I am getting my looms ready for the upcomming shadow weave classes.  You can sign up by going to weavolution.com


Sunday, July 31, 2011

Shadow Weave Class

I will be teaching an online Shadow Weave class starting in late August.  For details go to http://weavolution.com and look in the classes section.  Students attend via computer and are encouraged to conduct a weave study.  The class will cover 4 - 8 shaft shadow weave, drafting and varying treadling plans to vary the design.

Wednesday, July 20, 2011

Salvage and Restore?

I have been asked to help with some equipment that was sitting in some moisture (a sewage break).  Upon first inspection the blackened wood seemed quite suspect, however after an initial cleaning with a mild bleach solution it looks like this might not be so bad.

The wood seems structurally sound although the product could not be sold by the owner without repair.  So weavers, if you can put your looms into rubber feet (as the countermarch looms and LeClerc looms usually are) it will prevent moisture traveling up the wood.  With some further tlc and elbow grease I may be able to restore the lower portions of the wood.

Sunday, July 17, 2011

Yarn Inventory Spreadsheet

I created this spreadsheet that helps me keep track of my yarn inventory.  It can be found here -

https://spreadsheets.google.com/spreadsheet/ccc?key=0ApZXJvcrXSzCdFdsUWhSLXZReW1ad2Rma2ZZXzl5WEE&hl=en_US

Hopefully all the formats are still in the right place as I had to clear the columns.  Leave a comment and let me know what you think?

Dawn

Thursday, July 14, 2011

Warping Mill

As requested, here are photos of the mill with some rudimentary dimensions:

Mill folded stands about 52 inches high - center pole is a 1 1/2 diameter plumbers metal pole with screw cap top.


Base is made up of 2 x 2s and some mitred 1.5 x 1 pieces, metal pole is capped by a plastic 2 inch piece which sits in a hole all the way down to the bottom (metal pole sits 1/2 inch up from floor)



Cross pieces which support the side poles are 30 inches across, 1 1/2 inch wood pole is countersunk and screwed/glued.

The frame consists of 2 frames 30 in width, wood poles 40 inches long.  One frame interlocks with the other so the frame can fold (see how cross piece is one above and one sits below)


Cross pieces (24") with 1 1/2 inch dowels 5 inches long countersunk, glued and screwed.  Cross piece is 1 1/2 x 1 x 24" long, half circle cut to wrap around the wood vertical poles.  Screw eye bolts secure the two pieces together to secure the frame and make the cross bars/posts



Cross bars in place, the lower cross bars can be put according to your warp length.  Total circumference is 2 yards around.  Wood used was poplar and lightly stained.

Tuesday, July 12, 2011

Warping Mill Plans

In a recent discussion on Weavolution I described a home made warping mill I had made.  I will post photos as soon as I can access the mill and will include measurements for those interested.  I have had it for at least 6 years and it is holding up very well for a cost of approximately $50 dollars.  You can also email me privately via contact info or comments.

Warping Front to Back


Previously we looked at dressing for all occasions. Back to front, and back to front with weights (warp running front to back – not through the reed or heddles). Now lets look at the easy one – Front to Back. 

This is where a lot of people will say, that’s how I was taught, or that is how it is done in that great weaving book…. Each method has it’s place and each weaver uses their favorite method.  Front to back is useful for tying on to an existing warp on a smaller loom and for designing in the reed.

To begin. Place lease sticks in your crosses and secure them to the front beam of the loom. Cut the ends of your warp. If you used a guide string for center, find the center of the reed and dent accordingly. Or measure to one side of the reed for the width of your warp. For example; my warp is 10 inches, I measure 5 inches from center and start to dent. For my reed and sett I use a denting pattern of 2, 2, 1.
After a small section has been placed through the reed be sure to loosely knot to prevent your threads from coming out of the reed. When the warp has been dented in the reed (threaded through the reed) go to the back of the loom taking with you your draft and threading plan. Figure out how many heddles you need for each shaft and decide which side you would like to start threading. REMEMBER – your threading plan is now to be viewed upside down! If your plan is a 1,2,3,4 then you will thread 4,3,2,1.

Start to thread using your threading hook.
When your threading is complete tie the warp onto the back warp beam. Beam the warp under tension.  If your lease sticks are still in the front this may help with tensioning, if the sticks seem to hinder (depending on the yarn) take them out and raise a tabby shed to help tension.

 BE SURE TO WATCH AS THE END OF THE WARP NEARS THE HEDDLES AT THE FRONT – cut and tie the warp onto the front cloth beam.  Once the warp is tied onto the front apron rod and is nicely tensioned, you can raise a tabby shed and insert the lease sticks in the back of the warp.



Lease sticks in warp chain at front of loom




Cut ends ready for sleying - measure at reed for start of denting.  Secure lease sticks to breast beam of loom to free your hands.

















 View from back of loom




Be sure to read your draft "upside down" as you are working from the back to thread the heddles




Threading the heddles from the back of the loom


Tie the warp to the back apron rod and wind the warp under tension



Side view (lease sticks have since been positioned at rear by lifting tabby sheds - this is easier to do ath the very end when the warp is under tension)


Tying the warp to the front apron

Saturday, July 2, 2011

How Many Looms????

I have probably owned 30 looms.  As of now I own 5, I am thinking of selling the cherry Norwood as I love my Swedish looms so much.  My goal is to teach from home and weave. I love Toika looms (as anyone who has read this blog enough may gather).  I currently own 2 Laila looms by Toika - 26 weave width countermarch, AVL PDL 60 inch with 16 shafts and compudobby and a Glimåkra 63 inch loom for Drawloom weaving.  I am hoping to replace the Norwood with a Toika 48 inch Liisa.

Stay tuned as I hope to have lottsa weaving happening.  Currently working on an overshot sample in red and white, this will then be extended to the 60 inch AVL for throws.

Dawn

Sunday, June 26, 2011

It's time to get weaving!



Now that pre-school is over, I am also 1 week away from finishing my weaving classes, it is time to start producing.  I have no shows scheduled and my inventory is low.

I am still playing with the warp on the 10 shaft damask loom.  I love how easily designs can be altered.  A recent visit to MOMA in New York has given me some new inspirations.

Monday, April 25, 2011

Damask Sample





I finally worked the kinks out of the 10 pattern damask addition and drall pulleys.  At first I could not get a clean shed and shafts would not return to neutral upon releasing the treadle.  After some minor adjustments and new elastic - all is well!  I did have one pattern unit incorrectly placed.  Fortunately it was near the end and was fairly simple to correct.  Above is a sample of damask weave with a 6 shaft damask and 10 pattern units. The warp is 8/2 cotton in natural and the weft is a 6/2 cotton.  This sample will make cushions for my den.

Weaving with a draw shaft attachment is not overly complicated, just a little tricky logistically to get set up.  This attachment is an Opph ämta attachment.  It fits on the Glimåkra standard.   I also have a frame and handles for 70 shafts - however I'm a "I changed my mind - I like options" kinda girl so I will be re-reconfiguring the loom for a draw harness - this can allow for freestyle design and pattern repeats.

Happy weaving!

Dawn









Saturday, April 16, 2011

Dog Bone Dry!



Completely unrelated to weaving but - we had a bad storm and couldn't find our border collie.  My hubby finally solved the case:

Damask - Setting Up The Loom

I am preparing a warp for the 10 shaft damask attachment on the Glimåkra loom.  Below you can see the warp beamed and ready to be threaded through the back set of pattern harnesses.




The set up for damask is a 6 shaft 6 unit threading.  That is a 6 shaft ground damask with a 6 thread unit on the pattern heddles.


Here is a view of the pattern heddles being threaded.  The warp was prepared with 3 threads in the cross.  Therefore one complete "there and back" of the threads results in 6 threads (2 sets of 3).





Above - the pattern heddles being threaded. The pattern heddles are grouped into units (4-8 depending on ground weave) and joined at the bottom by a lingo weight.  







once all the pattern heddles are threaded, the beater, knee beam and breast beam are removed and the ends are selected from one of the pattern heddles (also using the lease stick threading sequence as a guide) and then the same end goes through one ground heddle on shafts 1-6.  Each end is threaded two times - once through the pattern heddle and once through the ground heddle


The ground threading goes rather quickly as the heddles have long eyes and can be threaded by hand without a hook.  The threads are then dented in the reed and attached to the cloth beam.

The shafts (both sets) are then adjusted in height.

Here it is in a little more detail:

More detail: Double harness & Damask weaving - loom has two sets of shafts: In the back of the loom are the pattern shafts (10-100) which hold the pattern threads, and the regular shafts on the countermarch using long eye heddles (2/3 inch eye)  in the regular shaft location.  


The pattern heddles are grouped into 6 per unit (or unit determined by weave) and are weighted by a lingo (long heavy looped hook to weigh down pattern shaft unit). The entire warp is threaded, 1 thread thru 1 pattern heddle grouped into 6 - joined by a weight whilst being held on a temporary holding shaft. 


The units once threaded are dispersed onto the pattern shafts according to the pattern drawdown (can be anywhere from 10 to 100 shafts - the more shafts the more of an extension the loom requires).  Even once the weaving has begun, the pattern units can be re-distributed to create a different pattern sequence such as straight draw, pointed repeat or single large point.
Then the regular ground shafts are put back in place (these use long eye heddles but regular length of 11.5 inches long.  The warp which is already threaded thru the pattern heddles on separate shafts from the regular ground shaft, is then threaded in a straight draw as with normal weaving (ground weave is a 6 shaft satin)  Denting and tying onto the apron is done in the usual way. Therefore; each thread is threaded through two sets of heddles - one pattern and one ground.
The long eye heddles allow the back group of pattern shafts to manipulate the threads whilst allowing the ground weave front shafts to move.  The blog was a very brief synopsis of the type of weave.  I have a few resources on damask if you would like to know more.




Monday, April 11, 2011

Catch Me On The Fly!


Glimakra single fly box on the damask loom

I have been straightening up my supplies, repairing and tinkering.  I finally got the pieces to the double flybox cleaned up and ready to use.  My first project is going to be an overshot blanket.  I like to weave wide and I like to weave fast!

The damask 10 shaft attachment is re-assembled and a warp ready to be dressed.

10 Shaft Pattern Unit - in the background you can see the 6 ground shafts with the buttonhole elastic used with the drall pulleys.



View from the front of the loom.


view from inside the loom


AVL double flybox


view from front


and the back